米制90°沉头方颈螺栓 BS 4933 - 1973
| 选择规格尺寸 M5 M6 M8 M10 M12 M16 M20 M24 |
尺寸单位:
毫米(mm) |
|
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
| ①,L≤125mm时，b=2d+6； 125＜L≤200mm时，b=2d+12； L＞200mm时，b=2d+25； ②,本标准中并未规定公称长度L，但可能在新版本中有所包含。 |
注：数据仅供参考！
更多供货信
类似标准及供货信息
| 1 |
 |
[国标] GB 10 - 1976 |
沉头方颈螺栓 Countersunk head square neck bolts 供应商(2) |
| 2 |
|
[国标] GB /T 10 - 2013 |
沉头方颈螺栓 Countersunk Head Square Neck Bolts 供应商(2) |
| 3 |
|
[国标] GB /T 10 - 1988 |
沉头方颈螺栓 Flat Countersunk Square Neck Bolts 供应商(2) |
| 4 |
 |
[国标] GB /T 21934 - 2008 |
土方机械沉头方颈螺栓 Earth-moving machinery - Plough bolt |
| 5 |
|
[德标] DIN 608 - 1981 |
沉头方颈螺栓 Flat countersunk square neck bolts with short square 供应商(1) |
| 6 |
 |
[德标] DIN 608 - 2007 |
沉头矮方颈螺栓 Flat countersunk short square neck bolts 供应商(1) |
| 7 |
 |
[德标] DIN 608 - 2010 |
短方颈沉头螺栓 Flat Countersunk Head Square Neck Bolts With Short Square 供应商(1) |
| 8 |
|
[德标] DIN 605 - 1981 |
沉头方颈螺栓 Flat countersunk head square neck bolts with long square |
| 9 |
 |
[德标] DIN 605 - 2010 |
120°沉头高方颈螺栓 Flat Countersunk Head Square Neck Bolts With Long Square |
| 10 |
 |
[美标] ANSI/ASME B 18.5 - 2008 |
沉头方颈螺栓 114° Countersunk square neck bolts |
| 11 |
 |
[美标] ANSI/ASME B 18.5 - 2008 |
大沉头方颈螺栓(皮带螺栓) Flat countersunk head elevator bolts |
| 12 |
 |
[美标] ANSI/ASME B 18.5 - 2008 |
大沉头方颈螺栓Table9 Large Countersunk Square Neck Bolts |
| 13 |
 |
[美标] ANSI/ASME B 18.9 - 2007 |
沉头方颈螺栓 Plow Bolts(Round,Countersunk,Square Neck) |
| 14 |
![3号沉头方颈螺栓（标准头）[Table 1]](http://img.tubajiao.com/upload/48/standard/2016/09/29/1475137959382933866.jpg) |
[美标] ANSI/ASME B 18.9 - 2012 |
3号沉头方颈螺栓（标准头）[Table 1] No.3 Regular Head Plow Bolts (Round, Countersunk, Square Neck) |
| 15 |
![英制114°沉头方颈螺栓 [Table 8]](http://img.tubajiao.com/upload/48/standard/2018/11/28/f2_1543388282.jpg) |
[美标] ANSI/ASME B 18.5 - 2012 |
英制114°沉头方颈螺栓 [Table 8] 114-deg Countersunk Square Neck Bolts,(Inch Series) |
| 16 |
![3号沉头方颈螺栓（修正头）[Table 1]](http://img.tubajiao.com/upload/48/standard/2018/12/05/f2_1543987772.jpg) |
[美标] ANSI/ASME B 18.9 - 2012 |
3号沉头方颈螺栓（修正头）[Table 1] No.3 Repair Head Plow Bolts (Round, Countersunk, Square Neck) |
| 17 |
 |
[意大利] UNI 6104 - 1975 |
C级90°沉头方颈螺栓 Flat Countersunk Square Neck Bolts - Grade C |
| 18 |
 |
[英标] BS 325 - 1947 |
粗制沉头方颈螺栓Table5 Black Countersunk Square Neck Bolts For Iron |
| 19 |
 |
[英标] BS 325 - 1947 |
110°沉头方颈螺栓Table6 Black Counersunk Square Neck Bolts For Woodwork |
| 20 |
 |
[英标] BS 4933 - 1973 |
米制120°沉头方颈螺栓 Metric 120°Countersunk Head Square Neck Bolts |
| 21 |
 |
[台湾] CNS 4418 - 1981 |
沉头方颈螺栓 Countersunk Head Square Neck Bolt |
| 22 |
 |
[台湾] CNS 4419 - 1981 |
120°沉头矮方颈螺栓 120°Flat Countersunk Head Short Square Neck Bolts |
© 易紧通 服务热线：4006-164580（免长途费）