开槽半沉头自攻自切螺钉 DIN 7513-GE - 2016

采用标准

选择规格尺寸

M2。5

尺寸单位: 毫米(mm)

德标DIN 7513-GE - 2016 DIN7513-GE 7513-GED 开槽半沉头自攻自切螺钉

扫一扫分享

螺纹规格
d

M2.5

P	螺距
d_k	最大值
d_k	最小值
k	最大值
n	最大值
n	最小值
t	最大值
t	最小值
安装孔尺寸	最大值
安装孔尺寸	最小值

0.45	0.5	0.7	0.8	1	1.25
4.7	5.5	8.4	9.3	11.3	15.8
4.4	5.2	8.04	8.94	10.87	15.37
1.5	1.65	2.7	2.7	3.3	4.65
0.8	1	1.51	1.51	1.91	2.31
0.66	0.86	1.26	1.26	1.66	2.06
1.2	1.45	1.9	2.4	2.8	3.7
1	1.2	1.6	2	2.4	3.2
2.26	2.76	3.675	4.575	5.575	7.49
2.2	2.7	3.6	4.5	5.5	7.4

替代列表

DIN 7513-GE - 1995 DIN 7513(GE) - 2016

注：数据仅供参考！

告诉我在“易紧通”看到，将给您最大优惠

深圳市昇沪紧固件机电盛通彩票登陆

联系人：黄俊辉移动电话： 13828802165 电话：0752～3951888, 3951820, 3951821, 3951825, 3951826 Email:

登陆后可见

材质：1008钢、1018#碳钢、Q235碳钢、35#合金钢、304HC不锈钢、316HC不锈钢，表面处理：环保彩锌、环保蓝白锌、环保黑锌、环保镍、热镀锌、达克罗、以及非环保电镀，规格：齐全

[询价]

类似标准及供货信息

1	[国标] GB /T 13806.2 (B) - 1992	十字槽沉头割尾自攻钉刮削端 Cross Recessed Pan Head Cutting Tapping Screws, Scrape Point 供应商(1)
2	[国标] GB /T 13806.2 (A) - 1992	十字槽盘头割尾自攻钉刮削端 Cross Recessed Pan Head Cutting Tapping Screws, Scrape Point 供应商(2)
3	[国标] GB /T 13806.2 (C) - 1992	十字槽半沉头割尾自攻钉刮削端 Cross Recessed Raised Countersunk Head Cutting Tapping Screws,Scrape Point
4	[德标] DIN 7516 (AE) - 1995	十字槽盘头自攻自切螺钉 Cross recessed pan head thread cutting screws 供应商(2)
5	[德标] DIN 7516 (DE) - 1995	十字槽沉头自攻自切螺钉 Cross recessed countersunk head thread cutting screws 供应商(2)
6	[德标] DIN 7516 (EE) - 1995	十字槽半沉头自攻自切螺钉 Cross recessed oval head thread cutting screws 供应商(1)
7	[德标] DIN 7513-AE - 1995	六角头切削螺纹螺钉 Hexagon head thread cutting screws 供应商(2)
8	[德标] DIN 7513-BE - 1995	开槽圆柱头自攻锁紧螺钉 Slotted cheese head thread cutting screws 供应商(1)
9	[德标] DIN 7513-FE - 1995	开槽沉头自攻自切螺钉 Slotted countersunk head thread cutting screws 供应商(2)
10	[德标] DIN 7513-GE - 1995	开槽半沉头自攻自切螺钉 Slotted oval head thread cutting screws 供应商(1)
11	[德标] DIN 7513-A - 2016	六角头切削螺纹螺钉 Hexagon Head Thread Cutting Screws 供应商(2)
12	[德标] DIN 7513-BE - 2016	开槽圆柱头自攻锁紧螺钉 Slotted Cheese Head Thread Cutting Screws 供应商(1)
13	[德标] DIN 7513-FE - 2016	开槽沉头自攻自切螺钉 Slotted Countersunk Head Thread Cutting Screws 供应商(2)
14	[德标] DIN 7516 (AE) - 2016	十字槽盘头自攻自切螺钉 - AE型 Cross Recessed Pan Head Thread Cutting Screws - Form AE 供应商(2)
15	[德标] DIN 7516 (DE) - 2016	十字槽沉头自攻自切螺钉 - DE型 Cross Recessed Countersunk Head Thread Cutting Screws - Form DE 供应商(2)
16	[德标] DIN 7516 (EE) - 2016	十字槽半沉头自攻自切螺钉 - EE型 Cross Recessed Oval Head Thread Cutting Screws - Form EE 供应商(1)
17	[汽标代号] Q 178	六角法兰自排屑螺栓 Hexagon flange removing scraps bolts
18	[汽标] QC /T 853 - 2011	六角法兰自排屑螺栓 Hexagon Flange Removing Scraps Bolts 供应商(1)